Subject: Coolant system for aircraft rotary
From: Rotary Engine
Date: 9/15/2008, 4:45 PM
To: AAA Put this in the To box


GREG FLEMING wrote:
Forgive me if this has been discussed before, but does anyone see merit
in using the Evans NPG waterless coolant?

http://www.evanscooling.com/main21.htm

Since this liquid's boiling point is much higher than regular 50/50
water/glycol, there is no boiling, meaning no pressure in the cooling
system.  No pressure from steam, that is.  Not as much pressure on the
hoses, clamps, fittings, etc.  Also appears to give better cooling
properties.

Anyone heard of this stuff?

Greg in Canada

People have tried it and it seems to work. In theory the conductivity between
metal and coolant is not as good as metal to glycol and water.

Paul Lamar


I used the Evans coolant in my Honda GoldWing for years.  As it was explained to me, most commercial antifreeze products have a micro-abrasive in them to keep the cooling systems free from excess scales.  A silica I believe.  These abrasives will wear out the aluminum water pump parts on the GoldWing engine as well as promote leaks.

Of all the problems that I had with that bike, thermal management was not one of them.
 Scott in Lakeside


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.