GREG FLEMING wrote:
> Forgive me if this has been discussed before, but does anyone see
merit
> in using the Evans NPG waterless coolant?
>
>
http://www.evanscooling.com/main21.htm
>
> Since this liquid's boiling point is much higher than regular 50/50
> water/glycol, there is no boiling, meaning no pressure in the cooling
> system. No pressure from steam, that is. Not as much pressure on the
> hoses, clamps, fittings, etc. Also appears to give better cooling
> properties.
>
> Anyone heard of this stuff?
>
> Greg in Canada
People have tried it and it seems to work. In theory the
conductivity between
metal and coolant is not as good as metal to glycol and water.
Paul Lamar
Hi Greg
Ian Beadle
iwbeadle@iinet.net.au of Perth Western Australia is using
Evans in his Renesis 6 port powered RV7.
He has flown off his test hours and is happy that cooling is now adequate.
He has a 374 inch^2 radiator mounted under the engine.
I am seriously considering using Evans though as Paul has said I believe
it’s conductivity is lower than that of water.
Steve Izett
Perth Western Australia
Building Renesis 4 Port Glasair Super II RG (Engine running)
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.