GREG FLEMING wrote:
Forgive me if this has been discussed before, but does anyone see merit
in using the Evans NPG waterless coolant?
http://www.evanscooling.com/main21.htm
Since this liquid's boiling point is much higher than regular 50/50
water/glycol, there is no boiling, meaning no pressure in the cooling
system. No pressure from steam, that is. Not as much pressure on the
hoses, clamps, fittings, etc. Also appears to give better cooling
properties.
Anyone heard of this stuff?
Greg in Canada
People have tried it and it seems to work. In theory the conductivity
between metal and coolant is not as good as metal to glycol and water.
Paul Lamar
Paul, this stuff appears to be basic propylene glycol. Back in the day when
we heard Dow was testing propylene glycol but not offering it commercially,
Everett talked to some of their research folks who provided us a drum for
flight testing our prototype rotary engines. An interesting feature was
that it was biodegradable.
Our goal was to reduce or eliminate nucleate boiling around the spark plug
bosses in the rotor housings during sustained high power settings. As I
remember, we started these tests in the late 1980's. In addition to
propylene we also tested various other water/anti-freeze combinations and no
pressure system, low and high pressure systems. Ultimately we settled on
what for us proved to work as the most superior cooling
combination--straight water with a small bottle (6-8 oz?) of Water Wetter
(or equivalent). The Water Wetter really helped reduce nucleate boiling
around the spark plug bosses. We settled on this combination with a
moderate pressure cap. The specs below may not be spot on but should be
close. I don't have my published charts handy listing all the
specifications for various cooling media but you probably have already
provided these. Oil listed here because at the time we nosing around
whether it would be possible to use oil cooling for a direct drive, 100 hp,
oil cooled version of our aluminum engine.
Thermal conductivity
Water = .343
Propylene Glycol = .173
Ethylene Glycol = .153
Oil = approx .08-.1
Specific Ht
Water = 1
Ethylene Glycol/water 50-50 = .825
Propylene glycol = .8
Ethylene Glycol 100% = .65
Steve Beckham
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.