I need a few used apex seal parts.
I am cleaning and reassembling an engine that is not very worn but I am missing
a couple of triangular corner seals and some short apex seal springs.
These are for a 1989 to 1991 2 piece apex seal 13 B engine.
Not the three peice seals.
The apex seals are hardly worn. New specs are .315 inches high and these seals
are all around .290 inches high. Many hours are left on these seals as
the low spec is .256. The engine does not justify new seals.
It won't be used in an aircraft. Let me know what you want in the way of money.
BTW I will be using a complete set of Creavey Teflon encapsulated silicon
O-rings in this engine.
http://www.creavey.com/
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.