Subject: What ever happened to the Carter prop?
From: Rotary Engine
Date: 10/12/2008, 3:18 PM
To: AAA Put this in the To box


 > Seems like it would have some applications if you were
 > limited in prop diameter and you had a lot of power to
 > dissipate.
 > Paul Lamar
 >
 >
 > The Paul Lipps prop is very similar and has been successfully
 > used on Reno
 > racers such as the Tom Aberle Phantom.  Laminar flow
 > airfoil and major drag
 > reduction at the tips: http://www.aberlecustomaircraft.com/video.html
 > Craig Catto makes them to Pauls spec.
 >
 >                                            Glenn


 > The plan forms could not be more different :)
 >
 >
 > Paul Lamar


Here is a link to contact Paul Lipps with some picture of his props
http://www.biplaneaerobatics.com/elippse

Marc Joseph

I e-mailed Paul Lipps some time and suggested what he was doing was beefing
up the inboard area which does the most work and reducing the outboard area
which does the least amount of work. He agreed with that assumption and sent
me some photos of old design which I assume from which he has refined the
design.
Something old is something new again.
George ( down under)



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.