Subject: BMW water pump cartridge.
From: Rotary Engine
Date: 10/14/2008, 7:13 AM
To: AAA Put this in the To box

You are paying big bucks $195 for that BMW water pump cartridge Doug.
At that price it should be 6 times better than the stock 2nd gen
Mazda cartridge at $30 :)

"Stewart Stage 1 water pumps, which cost only $69.95 mail order, also out perform our leading competitor. The same laboratory tests proved the Stewart Stage 1 Chevrolet Small Block water pump compared to the pump our leading competitor offers:

    * 67% more pressure @ 6,000 RPM
    * 29% more flow @ 6,000 RPM
    * 47% less horsepower loss @ 100 GPM"

Why did you not buy a Chevy cartridge at $69.95 since you are building
your own housing anyway?

"Flow in GPM (Gallons Per Minute)
RPM     Competitors   Stewart Stage 1
1000     17..............18
1500     25 .............32
2000     34 .............42
2500     42 .............55
3000     51 .............65
3500     59 .............77
4000     68 .............90
4500     76 ............101
5000     85 ............112
5500     93 ............122
6000     102 ...........132
6500     110 ...........138
7000     119 ...........148
7500     127 ...........157
8000     139 ...........158"

Looks like you can run the Chevy pump at 3000 RPM
and double the stock Mazda flow. Pump HP consumption should
be way down If Stewart is not lying :)

Mount the pump down low on the side of the
engine as severe damage is done to the pump if
the water level is low.

Paul Lamar

The Rotary Engine Newsletter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.