> > Paul,
> >
> > I did not extend the cowling because there is no more space up
> front,> extending it, it would overhang over the canopy which
then
> could
> > not be
> > opened.
> >
> > Rino
> >
> > Ah so. Right! I forgot. We are between a rock and a hard spot
here.> > Does anybody have CFD up and running?
> >
> > Paul Lamar
>
> I do have a limited amount of CFD ability w/ SolidWorks. If
you've got
> a model, I'd be glad to mess w/ it and see if I can get any
> answers for
> you..
>
> Jarrett
>
> OK Jarrett. I'll work on a simple model. Can it be 3D?
>
> Paul Lamar
>
> Here are some 2D models. I think we can get a pretty good idea from
> what is going on with 2D models. These are with and without side
> rads. And also one without side rads at a 5 degree angle to the
> air stream
> to see what happens when the AC is flown in a yawed condition.
>
> Paul Lamar
Paul only one set of results so far.. I'm still playing and
learning how to
run this..
anyway.. it looks like there is a fair amount of seperation past the
50% chord line..
Jarrett
Yes. Not unexpected. Thanks
Paul Lamar
Ya.. I'm just looking at the graphed units
and something doesn't add up there.. the avg speed
appears to be 9000in/s.. which equates to 500mph..
I must have put an extra zero in there someplace..
I'll do a couple more runs tonight and see if I can get
more usable data.. I've also narrowed up the air
stream.. in this pic I've made it extra wide because
I wasn't sure about 'wall effects' etc... in the next
one's I'll narrow them up by 1/2 the width so
we can see in more detail how the streams flow..
I'm use a 'baby' version of the software so it's
fairly limited as to what it will do.. It's a teaser
version.. makes you want the full deal.. :-)
Jarrett
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.