Paul: I have been researching the rotary for several months now, and
following your discussion more recently. There are so many great
reasons to fly the rotary - many of them more subtle than at first
look. As of now, I am a little confused about the philosophy of the
different oil delivery concepts. Dis-able the factory injection and mix
oil into the fuel? Like Rotamax who injects it through the e-shaft and
then throughout. Or, external cooler and closed loop system? Maybe you
can shed some light on this subject - differences, advantages,
dis-advantages, etc.
Thanks.
Jason Backs
Houston
There are two oil systems in the rotary. There is a conventional
"crankcase" system that pressure feeds the bearings and then an apex seal
lube system. Only the apex seal lube system is disabled and 2 cyclei oil
mixed with the fuel.
One oz per gallon is all you need. That is the best as 2 cycle oil unlike
"crankcase" oil burns cleanly. Another possibility is use an external tank
for the 2 cycle oil and use the apex seal metering system to draw 2 cycle
from that tank.
Paul Lamar
Paul,
When I use one ounce of two cycle oil per US Gallon, after a while the oil
in the oil pan gets higher. When I use a bit less two cycle oil, the oil
in the pan stays the same. How much less two cycle oil I use, I will check
that out, I always use the same small container (bottle) to measure the two
cycle oil I use per 5 US Gallon can, it is about 3/4 oz per gallon.
Rino
Yes that will work I guess. Here is a chart that Mazda published.
If you are burning ten gallons an hour you need to divide these numbers
by 10. Divide by how many gallons you are burning. Mazda over did it with the
RX8 engine and they were forced to add another oil injector around 2008.
Too much is a lot better than too little. I had .5 OZ to every gallon
on my 2004 RX8 in addition to the metering pump. Surprisingly the oil is used to
cool the apex seal.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.