Paul
Please post the Stewards Components bad boy pump over this way. I am not
going to give up before I start. Jeez! I will however test both pumps
plumbed through a hot engine block and heat exchanger and at steadily
rising temperatures and rpms. If you want the pumps mounted on a torque
arm I can do that as well.If the BMW unit performance is on par with the
Mazda pump then I will be happy to have solved a packaging challenge on
my engine. This is not an electric pump adventure and shouldn't be
confused as such.
Green tea sipping Mac lover in Japan.
No problem I'll mail it Monday.
I don't need the torque data. It would be of academic interest only.
1 or 3 HP is not going to make that much difference in an aircraft
engine.
A car engine is an entirely different matter as the engine is running at
only
25 HP or so. Remember... don't over cool. It is going to hurt your BSFC.
The ideal would be a 500 degree rotor housing all the way around.
Paul Lamar
Doug,
Reading and watching with great interest.
George
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.