Subject: Rotor face temp thru p-port - with IR detectors?]
From: Rotary Engine
Date: 11/6/2008, 3:02 PM
To: AAA Put this in the To box


Just a thought... what do you think?

Anyone fiddled around with IR radiometry detectors? Are they fast enough to
line-scan the rotor face temp with a reasonable accuracy?
How about an IR camera? Too slow?
Where to put metering holes? can the array be fit somewhere into port or do
we disutrb the inflow too much? Can we see edge areas also from p-port?
Row of discreet holes better? Apex oil gets in, how to cover 'em?

Instrumenting the rotor itself is a bit tricky, so this would give
comparatively easy way to measure rotor face temp as mixture sees it - on
the fly...

And... by correlating those IR measurements with some kind of in-rotor temp
measurement run would give a pretty good idea what's going on on combustion
chamber and rotor metal, temp-wise.

Cheers,

Petri



Q Anyone fiddled around with IR radiometry detectors?

    Yes, I worked for a firm called Electro-optical industries for several
years, they supplied the military, aerospace and research industries with
infrared blackbodies and specialized IR instrumentation.



Q Are they fast enough to line-scan the rotor face temp with a reasonable
accuracy?

    do you have a specific sensor in mind? Most of those I'm familiar with
are not high speed devices. A lot depends on the nature of the data you need
to collect. As I'm not an expert in internal combustion engines, you would
have to quantify "fast enough" and "reasonable accuracy". First you need to
define your performance requirements, temp range to be measured, degree of
accuracy, time interval, etc.

Q How about an IR camera? Too slow?

In a laboratory setting or what kind of installation? IR cameras are not
cheap, price is dependant on resolution, measurement range, detector
speed..... Then there is the tooling and adapters for the application. All
would likely be custom fabrications.

Q Where to put metering holes? can the array be fit somewhere into port or
do we disturb the inflow too much?

Dunno, would have to know which sensor is used first. I'm thinking a
pyrometer kind of device would be more practical, less expensive, easier to
implement.
All depends on your measurement specifications, degree of accuracy, etc.

    C. Smith

Thanks C

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.