> >> Hey Marco - I live in Golden, Colorado USA and am planning
> >> on building this plane
http://www.ligeti-stratos.com
> >> I have scaled it up from 78 sq ft to 110 sq ft and am
> >> planning to use this engine
> >>
http://www.woelfle-engineering.com/ at 50 hp. It is a
> >> racing kart engine that was used in a turboed version in
> >> 2007 to set the world powered paraglider altitude record
> >> flying over Mt Everest
> >>
>
>
http://www.gknmissioneverest.com/missioneverest/themissioneverestparamotor1.asp
> >> and
http://www.gknmissioneverest.com/
> >>
> >> There is now an American made wankel engine that is
> >> available in single rotor 65 hp and dual rotor 130 hp and
> >> turbo 180 hp here
http://www.rotamax.net. These are very
> >> light engines. I'm interested in one for my Europa
> >> kitplane. Hope this helps - good luck!
> >>
> >>
> >> Glenn Crowder
> >
> >
> >Dear Glenn
> >
> >thank you for the links, i will enquiry on the
> >"affordability" of rotamax (even if the 65 is a bit small
> >and the 130 is overrated for my application) and know more
> >on the go-kart woelfle engines, this latter is good to know
> >for thinking on other projects but really too small for my
> >application.
> >
> >concerning the Ligeti Stratos, it is a very interesting
> >policy they have done with their "open source" thing.
> >concerning the machine, it is really a piece of elegance! by
> >the way, why are you increasing the surface? are you
> >planning to make it a twin seater? other tweaks? i'm
> >curious.
> >i read about its flight control technique, one can have some
> >fun with it :-)
> >
> >thank you again for the links
> >
> >mrk
> >
> >-------
> >Aerial Creatures & Cognitive Integration
> >
www.karenfuxia.com
>
> Glenn,
>
> This plane looks like a good candidate to go thin film PV or PV battery
> electric. Check out what Sonex has done with their electric plane.
>
> Doug in Japan
>
> Doug, I mailed your other pump today.
>
> Paul Lamar
>
Hi Marco - my summertime density altitude norms are between 7000 to 9000
ft on a hot day plus no matter how much I diet and exercise can't seem to
break 220 lbs! A buddy has a Koenig 3 cyl 24 hp powered Swift glider (same
engine as used on the original Ligeti-Stratos) and even on a 4700 downhill
runway climbs sluggishly (dangerously?). I have modeled the Stratos in
X-plane 8 and have it flying very well I think. It pretty much flies itself
and is stall/spin proof unless you hold one of the tip rudders at full
deflection. I have redesigned the control surfaces for ease of building and
have all surfaces on the forward (lower) wing. The main wing is totally
clean with only the tip rudders. The lower wing is totally flat with no
twist and the main wing has 3 deg dihedral with no twist. The original
airfoil was a Wortmann FX series but seems to have undesireable negative
pitching moments in the sim at higher speeds. The NACA 23012 low moment
airfoil only gives up a negligible amount of lift in return for no negative
pitching at high speeds.
I would be happy to send you the X-plane 8 model
to try. Would love to get any feedback. The ailerons work right up to
stall speed where they get a bit mushy but you still have plenty of
authority with the tip rudders, rolling nicely even below stall. I got rid
of the flaps as the a/c flies very slowly without them but needed a
bellyboard to degrade the 20/1 glide for landing. Much simpler and lighter
than four separate flaps. Very wide speed range with a 50 hp engine, WOT at
160 kts, stall at 40. The stall is just a nose bobble and is possible to
take off with the stick full back at full power with the a/c rotating and
climbing out with just a mild pitch oscillation with full roll control.
Marco I think the only way to get near 100 hp at the weight you need is to
copy the Everest engine using the Rotrex C15 lightweight 6 lb supercharger.
BMW uses this supercharger on one of its motorcycles. This gave 85-95 hp at
38 kg for the Everest flight.
http://www.rotrex.com
@Doug The PV electric is interesting but would only provide marginal
recharge in flight. Most recharging would have to be done on the ground and
I can't really see leaving this thing out on the ramp waiting hours for a
free charge! However, the new Lithium Ion Phosphate technology would allow
10 minute recharges if you had a high amp charger! Here's an interesting LiP
pack here, 12.8 V 16 ah pack at 3.8 lbs and puncture proof. I'm looking at
a way to use this pack in my Europa to replace my 23 lb Concorde gel cell
but it requires a constant current 14.4v till charged.
http://store.peakbattery.com/lfp200es-128v-16ah.html
Glenn
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.