Marco,
I did look at the Ligeti-stratos some time ago and found
it a very interesting design. Who do we contact to discuss
design and construction?
I was hoping some one would
mention the one rotor, such as being developed by Richard
Sohn. I also have my own single rotor development, going
very slowly however.
The is also the new Mazda Rotary the 16X ( all aluminium )
2 rotor- perhaps a single rotor of these parts would do
the job, all easily produce 100 hp and more if needed. I'm
hoping for 125 hp with a P-Port single rotor. However I
don't know what engine weight restrictions you have, I
think the standard weight all up with reduction gearbox (
45 lbs) and heavy cast iron end housings, a single wet
engine might be as heavy as 290 lbs. All up under 300 lbs
anyway. The 2 rotor is about 340 lbs all up. Richard Sohn
has some weight reductions with his design worth
investigating, He's running a Hirth Gearbox with some
composite ( Al and cast iron) end housings. His weight
could be as low as 200 lbs (I think) - maybe less, I can't
really remember. Don't get angry with me here Richard, as
I can't remember all the details.
Personally I think this is the path to follow ATPIT.
George ( down under)
Dear George!
it is not me the one introducing the Ligeti-Stratos in the
newsletter, it is Glenn Crowder from Golden, Colorado, who
is planning to build one. he did it because i asked for an
engine for my prototype aerobatic flying wing (nothing to
share with the ligeti stratos), cfr. my original email.
Glenn and i talk about this because we seem to like flying
wings and rotary engines :-)
i am no technician and i'm trying to figure out the possible
"easy" solutions. i will check the single rotor you mention
at real world solutions (richard sohn.... BTW is he in this
newsletter?)
thank you for the details you write about the tweaking of
the new mazda rotary, but actually my target weight is 80kg [176 pounds]
max, figures around 60 kg [132 pounds] would be better, and target power
is 100 HP
thank you again and keep ideas coming
mrk
-------
Aerial Creatures & Cognitive Integration
www.karenfuxia.com
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.