After many interruptions, I've finally achieved an engine hanging on the
front of my Zenith 801. Many thanks to Paul and Jerry for the engine
mount & continuing advice.

I've attached photos showing key angles, including firewall clearance,
overhead clearance, and the center mount brackets / turnbuckle. The
clearances worked out great. The engine couldn't have gone back any
further w/o the oil pan hitting the nose gear strut. As you can see in
the photo's, it absolutely couldn't go any higher. I've also fitted the
alternator, and there's plenty of room for it in all directions.

--Kenny A.



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.