Subject: Message from enjauto: Billet rotors
From: Rotary Engine
Date: 11/25/2008, 3:25 PM
To: AAA Put this in the To box



Billet rotors

Hello, My name is Edgar Perez and am the owner of E&J Performance.
The reason for this email is because of what i heard at the end of
this video. We have created a billet rotor. Our rotor is at a current
weight of 7.1 pounds and soon to be at 5.75 pounds. We have 14 pull
on a dyno and getting some good horse power. After 10 pull on the dyno
we took the motor apart and found every thing in perfect conditions. We
were able to do one pass one the track but the conditions werent to
good.
The car will be going back to the track on wed. Some of the videos are
here
on youtube under billet rotor.

thank you

858 HP @ 36 Boost Billet rotor

http://www.youtube.com/watch?v=2ZOHdimyPmc&feature=email

TURBO2, STREET PORT
HISTORY WAS MADE TODAY.
FIRST SET OF BILLET ROTORS WITH EXCELLENT PERFORMANCE.

http://www.eastcoastparts.com/

ENJAUTO@BELLSOUTH.NET <mailto:ENJAUTO@BELLSOUTH.NET>

Edgar Perez

---------------------------------------------------------------------

Do you do counter weights as well?

Paul Lamar

Paul,

Yes, we are using the RX8 counter and rebalancing them.

 MIAMI'S BEST KEPT SECRET
Edgar Perez
President E&J AutoWork, Inc.
19200 SW 106 Ave.,Bay 36
Miami, Florida 33157 enjauto@bellsouth.net
www.eastcoastparts.com tel:
fax:
mobile: 305-259-6767
305-259-6056
786-259-5040 

Paul,
Are these Billet rotors solids or do they have some oil cooling pockets?
George ( down under)

Does not look like it.
What about rotor cooling Edgar?

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.