Subject: Folded core for a Glass Goose
From: Rotary Engine
Date: 11/26/2008, 6:30 PM
To: AAA Put this in the To box



Paul,

To answer your question: "OK are we good to go with small cores in a folded
core configuration?" Absolutely!

I'm following up on a lead to contact Neil at Fluidyne Powersports. Those
guys specialize in radiators for ATV and motorcycles. Here's my email to
them:

I'm trying to cool a Mazda Renesis rotary engine and I have very limited
space to do it with. I'm looking for four small aluminum water radiators
with a cores about 11" x 9" (+- 1") by 1" or 1.5" thick. Can you help me?

Here's their response back to me:

---------------------------------------------------------------------------
Hello Sandy.thanks for your inquiry.  I think we can help you.  We can do an
11" x 9" x 1.5" core from standard parts.  The tank depths are usually 1.5"
or so which will give you an overall height or width of 14".  My suggestion
is to send a sketch of your desired dimensions, including inlet, outlet
tubes, filler neck etc. and we can respond with our best configuration for
your needs.  If we can meet your dimensional requirements, the time to build
the parts is about two weeks.  I will need a little more detail on the
fittings, brackets etc. prior to estimating the price.  In any case, we'll
make it a fair deal.

I'll send them a picture of the cooling block and see what they think about
it. In the meanwhile, looks like they can fabricate a radiator in a size I
can use. Can you give me some specifics on some of their questions if I go
with four single radiators?

Dimensions:
Inlet: I think you said 1-3/8"
Outlet: I think you said 1-1/2"
Filler neck:
Any other requirements:

In the meanwhile I'll approach Ed Kleppis again. He was very helpful, but
suggested alternatives to the cooling block because of the difficulties of
welding it. I'll let you know.

Thanks, Sandy

The requirements look great.
You can send my 3D's to Fluidyne but give me credit
for the design. Give them my email address so if they have questions they
can
contact me.

That is the trouble with Ed. He does not like to build it to the dwg.
I had him build a cross counter flow rad one time. When it was done he had
completely defeated the design by welding the cores together.

Fluidyne on the other hand would probably understand what you are
trying to do as they are engineers. I would not be a bit surprised if
they started offering it as an off the shelf configuration :)

What would really be cool (pardon the pun) is to have them mount
the water tubes at an angle. Not just the cores. That would reduce the drag.
Get them to quote it both ways. Give them an overall width and depth so they
can
get the angles right. Can you live with 14 inches high? If not a one
inch high tank on both top and bottom would work. That would bring the
height down to 13 inches overall.

Paul Lamar
-- 
----------------------------------------------------------------------------
----------------------

Paul,

I'll make sure they know where the drawings came from. Is that Russian print
on the pictures?

I'm afraid I don't quite grasp the "mount the water tubes at an angle". I'm
visualizing the radiators raked back like a parallelogram. Is that right?

I am really maxed out at 13" of height. I would like to also get a little
relief on the width which is 22.5" with a 35% intake for each core.  30%
intake would make a 2.6" difference in width.

I mocked up the six core design. Pictures attached,

Waiting to hear back from Ed Klepeis and Neil at Fluidyne Powersport.

Thanks, Sandy


Looking good Sandy.

Greek

I think it would still work great if you cut down the over all height to 11 inches. Especially if all they have is 1.5 inch thick cores.


"mount the water tubes at an angle"
The water tubes are aligned with the airflow as in the last sketch.
Cuts the drag. I don't know if Fluidyne can do that.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.