Aluminum aluminum Billet rotors
Hello, My name is Edgar Perez and am the owner of E&J Performance. The
reason for this email is because of what i heard at the end of this
video. We have created a billet rotor. Our rotor is at a current
weight of 7.1 pounds and soon to be at 5.75 pounds. We have 14 pulls on
a dyno and getting some good horse power. After 10 pulls on the dyno we
took the motor apart and found every thing in perfect conditions. We
were able to do one pass on the track but the conditions werent too
good. The car will be going back to the track on wed. Some of the
videos are on youtube under billet rotor.
thank you
858 HP @ 36 Boost Billet rotor
http://www.youtube.com/watch?v=2ZOHdimyPmc&feature=email
TURBO2, STREET PORT
HISTORY WAS MADE TODAY.
FIRST SET OF BILLET ROTORS WITH EXCELLENT PERFORMANCE.
http://www.eastcoastparts.com/
ENJAUTO@BELLSOUTH.NET <mailto:ENJAUTO@BELLSOUTH.NET>
Edgar Perez
---------------------------------------------------------------------
Do you do counter weights as well?
Paul Lamar
Paul,
Yes, we are using the RX8 counter and rebalancing them.
MIAMI'S BEST KEPT SECRET
Edgar Perez
President E&J AutoWork, Inc.
19200 SW 106 Ave.,Bay 36
Miami, Florida 33157
enjauto@bellsouth.net
www.eastcoastparts.com tel:
fax:
mobile: 305-259-6767
305-259-6056
786-259-5040
------------------------------------
Paul,
Are these Billet rotors solids or do they have some oil cooling pockets?
George ( down under)
-------------------------------------
Does not look like it.
What about rotor cooling Edgar?
Paul Lamar
---------------------------------------------
At this time we are running methanol and found no need to put in the oil
pockets. When we move to gasoline it might be necessary. The iron rotors
oil cooling is a must because it is iron.
MIAMI'S BEST KEPT SECRET
Edgar Perez
President E&J AutoWork, Inc.
19200 SW 106 Ave.,Bay 36
Miami, Florida 33157
enjauto@bellsouth.net
www.eastcoastparts.com tel:
fax:
mobile: 305-259-6767
305-259-6056
786-259-5040
------------------------------------------------------------
If you cut some more weight out of that rotor Edgar you can run the
engine faster and get even more power. The RPM of the engine is limited by the
weight of the rotor.
Paul Lamar
--------------------------------------------------------------
That is our plan. The problem that we found was the balancing. We felt
that going lighter with out testing was going to be a mistake. But now
that is working light weight is the key. Our goal is to get it down to 5 pounds.
MIAMI'S BEST KEPT SECRET
Edgar Perez
President E&J AutoWork, Inc.
19200 SW 106 Ave.,Bay 36
Miami, Florida 33157
enjauto@bellsouth.net
www.eastcoastparts.com tel:
fax:
mobile: 305-259-6767
305-259-6056
786-259-5040
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.