Hi Paul,
Do you know if anyone has converted the Rotary for running on LPG /
Propane or Compressed natural gas?
If you push the efficiency to the limit with the turbocompound and
perhaps even more with heat2power what would the BSFC then become?
BTW what units do you use when you talk about BSFC would drop from .47
to .357?
How does that translate in g/kWh?
Regards
Randolph
--
Randolph Toom
Managing Director
heat2power SARL
Runs fine on natural gas. Ingersol Rand built a 1920 cubic inch
engine that ran on raw NG. They had trouble with detonating
from time to time. BMEP was 105 psi. 782 HP at 1525 RPM
83% VE. (They needed a 120% VE p-port :)) BSAC 7.9 pounds of air
per hour per HP.
Smaller Mazda based engines run fine on NG.
Paul Lamar
That would be:
(xx gm/Kw-hr)(1 lb/454 gm)(.746 Kw/1 hp)
overall: 1gm/Kw-hr = .00164 lb/hp-hr
Aubrey
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.