> Anybody selling a 20B pusher mount? My velocity airframe is complete(!)
> and i am gearing up for engine and instrument install. Al Gietzen
> modified a Franklin mount, but my welding skills are...subpar, to say
> the least.
>
> Also, I have decided to go turbo, not supercharger. What turbo did Tom
> Parkes use on his ES and what is the latest version of the
> turbocalculator spreadsheet program?
>
> jeremy solomon
>
> Jerry Hey can build you a motor mount. Make a sketch of the
> firewall hard point locations and the distance from the firewall
> to the prop flange. We have a few designs but we need to double check.
>
> Do you have your turbo and water cooling plumbing decided? You should
> do that before a motor mount can be designed and built. Here are a few
suggestions. Do you have 3D drawing capabilities? If not I suggest making
> foam mock ups of all the parts and located them before proceeding with
> the motor mount design. I'll do a 3D for free after you decide where
> you want to put things and you have a turbo manifold and waste gate
> chosen.
>
> Tom Parkes can answer the turbo question.
>
> Here is Dave Leonards turbo calculator but I am not sure it gives
> you enough info to insure the turbine will live under aircraft
conditions.
> At least half a dozen car turbos have been destroyed so far.
> You are much more likely to get the turbo to live if you use an
> aircraft turbo. It's a long story but car turbo charger can be
modified
> to slow the turbine so they will live. Easier to find an aircraft turbo
> and use it.
>
> Paul Lamar
Paul, are there excellent SolidWorks files available such as a
tractor driven unit 13B that I could adapt to a super cub/Patrol
frame?. We have solidworks, and if there are some time saving work
already done, I would provide feed back when a new or different mount
would be drawn up.
The drawings/modeling of the 20B for the pusher were good and made me
think there was others already out there.
Scott
Sure Scott. The files are too big to email so I will set up a download
area on the web site with a stp file.
RV4's are about the right width so one of these might work.
I'll take the RV4 landing gear tubes out.
Give me a day or so.
Paul Lamar
A guy up here in Washington, Chuck Harbert had a 20B in his Vleocity,
but after a couple of problems with oil coolers blowing out, he went
with a Lycoming. I don't know how to get a hold of him, but he might
have just what you need. I'll ask around to see if I can look him up.
Brian Trubee
The oil coolers were made in China. The engine caught fire twice
and he crashed both times more or less. His wife threatened to divorce
him :)
He sold that motor mount and engine with TO-4 turbo years ago.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.