Don Bedwell,

Don did you get the stp file for the rotor housing?
What do you think?

Paul Lamar

Paul,

I have received many things in the last two days but I don't believe I have
seen this. Who sent it?

Don

I did. Here it is again.

Paul Lamar


Thanks!

Did you design it? Is it the latest version that Mr. Lin is using?

Mazda designed the rotor housing. They cost about $400 new from your local
Mazda dealer.  One of our subscribers did the 3D model. Yes it is the rotor
housing Charles Lin is using.

I have others as well.

Here is just the end housings less the rotor housings.
These are incomplete but useful for components inside cowl 3D's.

I also have an aluminum version of just the back end housing.

Paul Lamar



Paul,

I am trying to get just what Charles wants me to do. Will you send me any
and all of the solids that you might have for the EzyCopter airframe and
existing design with engine plus any other rotary models that you might
have?

Don Bedwell

I have no solids for the EzyCopter airframe.
I am sure Charles has some or perhaps just 2 D drawings.

I did some aluminum end housing for Charles and he has them.
His property.

The main problems are building up a one rotor engine, installing
the engine in the airframe and test flying it. Do you have an airframe
or can you build one? If not Jerry Hey can help.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.