Don Bedwell,

         Don did you get the stp file for the rotor housing?
         What do you think?

         Paul Lamar

         Paul,

         I have received many things in the last two days but I don't
believe I
     have
         seen this. Who sent it?

         Don

         I
      did. Here it is again.

         Paul Lamar


         Thanks!

         Did you design it? Is it the latest version that Mr. Lin is

using?

         Mazda designed the rotor housing. They cost about $400 new from
your local
         Mazda dealer.  One of our subscribers did the 3D model. Yes it is
the rotor
         housing Charles Lin is using.

         I have others as well.

         Here is just the end housings less the rotor
          housings.
         These are incomplete but useful for components inside cowl 3D's.

         I also have an aluminum version of just the back end housing.

         Paul Lamar



         Paul,

         I am trying to get just what Charles wants me to do. Will you

send

me any
         and all of the solids that you might have for the EzyCopter
airframe and
         existing design with engine plus any other rotary models that you
might
         have?

         Don Bedwell

         I have no solids for the
      EzyCopter airframe.
         I am sure Charles has some or perhaps just 2 D drawings.

         I did some aluminum end housing for Charles and he has them.
         His property.

         The main problems are building up a one rotor engine, installing
         the engine in the airframe and test flying it. Do you have an
airframe
         or can you build one? If not Jerry Hey can help.

         Paul Lamar

Paul,

I have received a model of the airframe.

Don Bedwell

Great Don. Looking forward to what you come up with.
Here are some jpgs of single rotor Mazda engines so you will have
a feel for them.

Paul Lamar