>
> > > Interesting page, Where can I get more information on using rotary
> > > engines in aircraft and cars. I am building a lotus 7 replica that I
> > > want to have 500 reliable hp out of. Also I am building an aircraft
> > > that I want to create as a ducted fan aircraft. This takes lots
of HP.
> > >
> > > DB
> > >
> > > 400 HP normally aspirated is no problem for a 3 rotor at 10,000 RPM.
> > >
> > > 400 HP turbo charged is no problem for a 2 rotor but everything
> > > must be right as it is more sensitive to mixture and boost.
> > >
> > > Ducted fans are horribly inefficient in the 100 to 200 MPH speed
range.
> > > My guess on top speed with 400 HP would be well under 200 MPH.
> > > Of course there would be lots of fuel burn on the order of 200 pounds
> > > per hour or 32 gallons an hour. Those that have tried have gone
back to
> > > props.
> > >
> > > Paul Lamar
> >
> > Thanks for the data. Yes I agree with the problems of the duct fan.
> > But there has got to be a way to make that work. The jets do it and
> > with enough power a piston engine could too. (my thoughts) perhaps a
> > better thing to do would ba a shrouded fan similar to the RFB
Fantrainer.
> >
> > David
> >
>
>
> Jet airliners are going further and further from requiring ducts on
> their turbines. The latest Pratt and Whitney engines run a gear
> reduction on the bypass stage (making it turn slower) and are seeing
> double-digit improvements in fuel economy. A turboprop is even better
> for efficiency. The only benefit provided by the duct is increasing
> the efficiency of a fan for which you don't have enough room for
> adequate diameter and/or when you don't want to gear down the fan
> section to control fan tip speed (trans/super-sonic losses).
>
>
> Regards,
>
> Matt-
Exactly. So if this issue is not over come then the propeller is still
the best option for homebuilts
David
BTW David, you are not a relative of Dale are you?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.