Subject: Hydraulic hybrid truck.-turbo-compound.
From: Rotary Engine
Date: 1/5/2009, 1:26 AM
To: AAA Put this in the To box

According to this article in Car & Driver UPS is building some hydraulic hybrid trucks. Package delivery trucks are ideal applications for KERS. (AKA hybrid) Stop start stop start all day long.
Just like a Formula 1 car :)

A hybrid does nothing for you on the freeway except increase your car payments :)

Some of the numbers in the article don't ring true like the weight of a fully loaded UPS truck at 23,000 pounds.
100 packages at 50 pounds each is only 5000 pounds.
Surely the empty weight of that aluminum bodied UPS truck is not 9 tons.

Notice however it beats a battery electric hybrid by being able to use all the stored energy. No life limit on the storage medium.

The other amazing thing is they claim 95% efficiency for the swash plate hydraulic pump/motor.
Over all eff. would then be 90%. Extraordinary.

Good work EPA, UPS and Car & Driver.

Paul Lamar

Actually, 18,000 pounds is about right for a UPS wagon.  I used to drive a Unimog with NO body (just the bed) and it weighed 15,000.  The chassis and drive train on a medium-duty truck are pretty beefy.

Keith W


The article says the truck weighs 5.5 tons.

As I see it, it is nothing else but a compressed air system with all its
heat losses when the air (80% N2), or in this case nitrogen (100% N2), it
heated by compression.
The hydraulics are just the "connecting rod" so to speak.

Rolf

All I saw was 23,000 pounds or 11.5 tons fully loaded.

Yes. That is interesting observation on the heat of compression.
Maybe you get that back when it expands to drive the motors.
Now if they can combine this idea with the Woodward hydraulic turbo compound
they may have something real big for stop/go AND the highway.

Paul Lamar

Paul,

I like the idea of a hydraulic hybrid.  Check out these websites:
http://www.hybra-drive.com/index.htm
http://www.newtechspy.com/articles06/hydraulichybrid.html
This as FAR better that dealing with all those batteries!

Steve Brazil

I just had another idea. You could pre-charge the system at night off the
grid with an electric motor powered hydraulic pump in your garage. That
would get you a few miles at real low cost.

I think this is the patent on the pump.

Paul Lamar


Paul,

That's exactly the thinking behind the plug-in electric hybrid.  This system
favors a bigger vehicle because of the size of the accumulators.

Steve Brazil

What is bothering me is most of these ideas were had in 2006. What is
holding it up? Is there a show stopper in there someplace?

Here is an earlier patent on the pump.

Paul Lamar


I believe some of you are overlooking or just ignoring an important fact.
The UPS system was specifically designed for large vehicles which make
frequent stops between close destinations, not for ones which drive long
distances between stops.  The UPS truck accumulators hold approximately 2000
hp-seconds of energy which is really not that much.   For example, with it,
one can obtain 200hp for 10 seconds, 20hp for 100 seconds, etc.  Another
vehicle which other articles points to as being well suited for this type of
system is a garbage truck because it is constantly stopping after only
driving a very short distance.

One of the driving goals of the design was to create a regenerative braking
system which did not rely on batteries; hence, one relatively free of the
life-limits of batteries and all the other problems and costs associated
with them.  Others were to keep it relatively simple and easy to inspect.

As for the thermodynamic losses due to the heat of compression, I suspect
good insulation helps limited that so that the system behaves more like an
adiabatic system.  Clearly, no real-world system that does work is truly
isotropic so some losses occur no matter how careful you are.

George at Santa Paula Airport

True George and I want to combine it with this hydraulic turbo compound
system to give the best of both worlds. BTW 200 HP for 10 seconds is enough
as the engine is only 170 HP. I am sure the truck can reach 35 MPH in 10
seconds with 370 HP available.

BTW would you run through your conversion from .26 KwHr 70% eff.
to HPHr for me. I get 88 HP for 10 seconds.

BTW these numbers are the same for any type of hybrid system as it is the
kinetic energy of the truck moving at 35 MPH. What you are saying, in
effect, is  no KERS is worth much. I agree :)

The hydraulic system at 70% recovery is claimed to be more efficient than
the Prius which only recovers 25% of the KE. A purely mechanical flywheel
system would recover more.

Paul Lamar


Yep Paul, a super flywheel would store lots of energy.....up until the
moment it disintegrates with lots of teeny tiny, high energy pieces flying
this way and that!!!  Or, more interesting, it would be fun watching the
vehicle roll over due to gyroscopic precession as it starts to suddenly
going up a steep incline.

George at Santa Paula Airport

I think you are exaggerating a bit George :)
Counter rotating gyros kill the effect.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.