Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/7/2009, 6:59 PM
To: AAA Put this in the To box

Paul & list,

I've been asked by my EAA club to deliver a presentation at next month's
chapter meeting on the rotary and how my conversion is going. I realize
this is premature, as my engine isn't even running yet, but there are a
bunch of gearheads in this club and they're interested.

I intend to do a powerpoint presentation of many of the issues we
discuss on this list re. piston autoconversions and pro's/con's of
rotaries vs. lycontinentals. Photo's, chart's (properly referenced), etc.

What I don't have, but would like to present, are an actual e-shaft,
rotor, and apex seals. Actually seeing and holding the parts are worth a
million powerpoint slides. My opinion is the e-shaft is most important,
because most of these guys have held both automobile and aviation
crankshafts, and the e-shaft is incredible in comparison.

Which brings me to the list; if anyone has discards of any of these
items that they'd be willing to donate, I'm willing to pay the postage.
I'd prefer discards so I don't have to mail them back ;/). I'd also
prefer they ship from somewhere in CONUS, as the postage from Australia
/ Europe / wherever might be more than my wife would tolerate.

I will include pictures of a rotaries innards anyway, so it's not
essential I get these. I just thought if someone's got scrap parts on a
shelf somewhere I can use them.

Thanks!


--Kenny A.
http://websites.expercraft.com/kennya/

Hi Kenny,
Make your life easier and sound like a Pro. Sound good? Contact Mark S.
(he's on this list) and ask for use of his Power Point presentation.
IT"S EXCELLENT!  Mark's contact was *mark.SUPINSKI at GMAIL dot COM*
<http://webmailb.netzero.net/webmail/new/8?folder=Sent&msgNum=00000PG0:0017ZCs600003EcW&block=1&msgNature=all&msgStatus=all&count=1231379239> (change
the dots and at's accordingly). I did this for Chapter 231 and it worked
out extreemly well. Hard copy almost all the screens so you are looking
toward your audience or at your hardcopies thru most of the
presentation. The entire presentation takes about an hour and forty
minutes so you might want to pay very brief lip service to some of the
slides to prevent glassy eyes in your audience...don't ask how I know
this. Good luck, it's a great presentation and every EAA chapter should
see and hear it at least once.    Dave M


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.