Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/8/2009, 10:12 AM
To: AAA Put this in the To box


   Paul & list,

   I've been asked by my EAA club to deliver a presentation at next month's
   chapter meeting on the rotary and how my conversion is going. I realize
   this is premature, as my engine isn't even running yet, but there are a
   bunch of gearheads in this club and they're interested.

   I intend to do a powerpoint presentation of many of the issues we
   discuss on this list re. piston autoconversions and pro's/con's of
   rotaries vs. lycontinentals. Photo's, chart's (properly referenced),
   etc.

   What I don't have, but would like to present, are an actual e-shaft,
   rotor, and apex seals. Actually seeing and holding the parts are worth a
   million powerpoint slides. My opinion is the e-shaft is most important,
   because most of these guys have held both automobile and aviation
   crankshafts, and the e-shaft is incredible in comparison.

   Which brings me to the list; if anyone has discards of any of these
   items that they'd be willing to donate, I'm willing to pay the postage.
   I'd prefer discards so I don't have to mail them back ;/). I'd also
   prefer they ship from somewhere in CONUS, as the postage from Australia
   / Europe / wherever might be more than my wife would tolerate.

   I will include pictures of a rotaries innards anyway, so it's not
   essential I get these. I just thought if someone's got scrap parts on a
   shelf somewhere I can use them.

   Thanks!

   --Kenny A.
   http://websites.expercraft.com/kennya/


   I have added your web site to the list of rotary builders
   web sites on the ACRE web site. http://www.rotaryeng.net

   Paul Lamar


   Kenny

   Are you in Kansas City/Overland Park area? If so maybe I can lend a hand


   Rick Pickett- lurker

Thanks for the feedback everyone, I'll definitely contact Mark.
Re-inventing the wheel is not my thing. I've only got 30minutes though,
so I'll have to do some serious paring-down of his slides.

Rick, Yes, I live in the KC area (Shawnee) and am a member of the Olathe
/ Overland Park EAA club (868). Do you have an e-shaft or rotor I can
use? If not, I'll have them mailed from Houston.

Paul- What's your opinion of posting the presentation on the ACRE site?
We'll need Mark's permission, of course.

--Kenny A.
http://websites.expercraft.com/kennya/

That is fine with me. I frequently give talks but much to Robin's chagrin
I wing it :) My thing is I throw up a picture or graph and talk about it :)
I don't use ppt.

Check out my web site again. I just added a lot of pictures of other peoples
completed installations that I think are well done. http://www.rotaryeng.net/
Scroll down to the middle of the page. You can capture (right click save as)
any of these you wish and use in ppt or anyway you wish.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.