Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/8/2009, 10:19 PM
To: AAA Put this in the To box


    Paul & list,

    I've been asked by my EAA club to deliver a presentation at next
month's
    chapter meeting on the rotary and how my conversion is going. I realize
    this is premature, as my engine isn't even running yet, but there are a
    bunch of gearheads in this club and they're interested.

    I intend to do a powerpoint presentation of many of the issues we
    discuss on this list re. piston autoconversions and pro's/con's of
    rotaries vs. lycontinentals. Photo's, chart's (properly referenced),
    etc.

    What I don't have, but would like to present, are an actual e-shaft,
    rotor, and apex seals. Actually seeing and holding the parts are worth
a
    million powerpoint slides. My opinion is the e-shaft is most important,
    because most of these guys have held both automobile and aviation
    crankshafts, and the e-shaft is incredible in comparison.

    Which brings me to the list; if anyone has discards of any of these
    items that they'd be willing to donate, I'm willing to pay the postage.
    I'd prefer discards so I don't have to mail them back ;/). I'd also
    prefer they ship from somewhere in CONUS, as the postage from Australia
    / Europe / wherever might be more than my wife would tolerate.

    I will include pictures of a rotaries innards anyway, so it's not
    essential I get these. I just thought if someone's got scrap parts on a
    shelf somewhere I can use them.

    Thanks!

    --Kenny A.
    http://websites.expercraft.com/kennya/


    I have added your web site to the list of rotary builders
    web sites on the ACRE web site. http://www.rotaryeng.net

    Paul Lamar


    Kenny

    Are you in Kansas City/Overland Park area? If so maybe I can lend a
hand


    Rick Pickett- lurker

Thanks for the feedback everyone, I'll definitely contact Mark.
Re-inventing the wheel is not my thing. I've only got 30minutes though,
so I'll have to do some serious paring-down of his slides.

Rick, Yes, I live in the KC area (Shawnee) and am a member of the Olathe
/ Overland Park EAA club (868). Do you have an e-shaft or rotor I can
use? If not, I'll have them mailed from Houston.

Paul- What's your opinion of posting the presentation on the ACRE site?
We'll need Mark's permission, of course.

--Kenny A.
http://websites.expercraft.com/kennya/

That is fine with me. I frequently give talks but much to Robin's chagrin
I wing it :) My thing is I throw up a picture or graph and talk about it :)
I don't use ppt.

Check out my web site again. I just added a lot of pictures of other peoples
completed installations that I think are well done.
http://www.rotaryeng.net/
Scroll down to the middle of the page. You can capture (right click save as)
any of these you wish and use in ppt or anyway you wish.


Paul Lamar

-
Kenny
e-shaft is assembled in the engine, I can show up at your meeting with the
whole assembly if need be. What is the date and time??
PS-- Paul thanks for hosting this forum you are doing a wonderful job of
expanding the rotary engine experience!

Rick Pickett

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.