Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/8/2009, 10:23 PM
To: AAA Put this in the To box


       Paul & list,

       I've been asked by my EAA club to deliver a
       presentation at next month's
       chapter meeting on the rotary and how my conversion is
       going. I realize
       this is premature, as my engine isn't even running yet,
       but there are a
       bunch of gearheads in this club and they're interested.

       I intend to do a powerpoint presentation of many of the
       issues we
       discuss on this list re. piston autoconversions and
       pro's/con's of
       rotaries vs. lycontinentals. Photo's, chart's
       (properly referenced), etc.

       What I don't have, but would like to present, are an
       actual e-shaft,
       rotor, and apex seals. Actually seeing and holding the
       parts are worth a
       million powerpoint slides. My opinion is the e-shaft is
       most important,
       because most of these guys have held both automobile and
       aviation
       crankshafts, and the e-shaft is incredible in comparison.

       Which brings me to the list; if anyone has discards of any
       of these
       items that they'd be willing to donate, I'm willing
       to pay the postage.
       I'd prefer discards so I don't have to mail them
       back ;/). I'd also
       prefer they ship from somewhere in CONUS, as the postage
       from Australia
       / Europe / wherever might be more than my wife would
       tolerate.

       I will include pictures of a rotaries innards anyway, so
       it's not
       essential I get these. I just thought if someone's got
       scrap parts on a
       shelf somewhere I can use them.

       Thanks!

       --Kenny A.
       http://websites.expercraft.com/kennya/


       I have added your web site to the list of rotary builders
       web sites on the ACRE web site. http://www.rotaryeng.net

       Paul Lamar



   Kenny

   I can contribute an old 13B E shaft, 1 13B rotor and a 12A rotor
   housing.
   Shipping will be from Calif.

   Robert
   ____________________________________________________________________

   Attached is a PowerPoint on the rotary that I did for my EAA chapter.


   Bob Rogers


Hi Paul / Kenny-

Kenny, you are welcome to use my presentation & modify / edit as you see
fit.  Drop me a line at mark@supinski.net <mailto:mark@supinski.net> &
I'll put it somewhere you can download.  It's quite large (around 120mb)
since it includes a video of a rotor going through the motions.

For those wondering, we've * finally* finished fabricating the custom
cowl & other firewall forward bits & will be firing up the engine for
final tuning this month.  I'll try to take a few pics so you can duly
poo-poo the results ;-)

Mark in CO

Congratulations Mark. I put your fine airplane on the
front page of the revised web site. Check it out.
http://www.rotaryeng.net

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.