Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/9/2009, 7:24 AM
To: AAA Put this in the To box


       Paul & list,

       I've been asked by my EAA club to deliver a presentation at next
   month's
       chapter meeting on the rotary and how my conversion is going. I
   realize
       this is premature, as my engine isn't even running yet, but
   there are a
       bunch of gearheads in this club and they're interested.

       I intend to do a powerpoint presentation of many of the issues we
       discuss on this list re. piston autoconversions and pro's/con's of
       rotaries vs. lycontinentals. Photo's, chart's (properly referenced),
       etc.

       What I don't have, but would like to present, are an actual e-shaft,
       rotor, and apex seals. Actually seeing and holding the parts are
   worth
   a
       million powerpoint slides. My opinion is the e-shaft is most
   important,
       because most of these guys have held both automobile and aviation
       crankshafts, and the e-shaft is incredible in comparison.

       Which brings me to the list; if anyone has discards of any of these
       items that they'd be willing to donate, I'm willing to pay the
   postage.
       I'd prefer discards so I don't have to mail them back ;/). I'd also
       prefer they ship from somewhere in CONUS, as the postage from
   Australia
       / Europe / wherever might be more than my wife would tolerate.

       I will include pictures of a rotaries innards anyway, so it's not
       essential I get these. I just thought if someone's got scrap
   parts on a
       shelf somewhere I can use them.

       Thanks!

       --Kenny A.
       http://websites.expercraft.com/kennya/


       I have added your web site to the list of rotary builders
       web sites on the ACRE web site. http://www.rotaryeng.net

       Paul Lamar


       Kenny

       Are you in Kansas City/Overland Park area? If so maybe I can lend a
   hand


       Rick Pickett- lurker

   Thanks for the feedback everyone, I'll definitely contact Mark.
   Re-inventing the wheel is not my thing. I've only got 30minutes though,
   so I'll have to do some serious paring-down of his slides.

   Rick, Yes, I live in the KC area (Shawnee) and am a member of the Olathe
   / Overland Park EAA club (868). Do you have an e-shaft or rotor I can
   use? If not, I'll have them mailed from Houston.

   Paul- What's your opinion of posting the presentation on the ACRE site?
   We'll need Mark's permission, of course.

   --Kenny A.
   http://websites.expercraft.com/kennya/

   That is fine with me. I frequently give talks but much to Robin's
   chagrin
   I wing it :) My thing is I throw up a picture or graph and talk
   about it :)
   I don't use ppt.

   Check out my web site again. I just added a lot of pictures of other
   peoples
   completed installations that I think are well done.
   http://www.rotaryeng.net/
   Scroll down to the middle of the page. You can capture (right click
   save as)
   any of these you wish and use in ppt or anyway you wish.


   Paul Lamar

   -
   Kenny
   e-shaft is assembled in the engine, I can show up at your meeting
   with the
   whole assembly if need be. What is the date and time??
   PS-- Paul thanks for hosting this forum you are doing a wonderful job of
   expanding the rotary engine experience!

   Rick Pickett

Rick,
That sounds great! Ideally, you can bring in your block, and I'll have
an  e-shaft and rotor sent in.  Depends on how bad you want to haul the
block around ;/). Either way, please attend as my guest, I could use the
backup on the technical side. The meeting is Monday 2 February at 7 pm,
please contact me off-list for location / directions, etc. kenny dot
aron at gmail dot com.

Also, someone from Houston replied with an offer to mail up an e-shaft
and rotor. Please reply to me off-list & we can arrange the postage.
Thanks again!

--Kenny A.
http://websites.expercraft.com/kennya/

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.