Subject: Show & tell at EAA meeting
From: Rotary Engine
Date: 1/9/2009, 12:52 PM
To: AAA Put this in the To box




        Paul & list,

        I've been asked by my EAA club to deliver a presentation at next
    month's
        chapter meeting on the rotary and how my conversion is going. I
    realize
        this is premature, as my engine isn't even running yet, but
    there are a
        bunch of gearheads in this club and they're interested.

        I intend to do a powerpoint presentation of many of the issues we
        discuss on this list re. piston autoconversions and pro's/con's of
        rotaries vs. lycontinentals. Photo's, chart's (properly referenced),
        etc.

        What I don't have, but would like to present, are an actual e-shaft,
        rotor, and apex seals. Actually seeing and holding the parts are
    worth
    a
        million powerpoint slides. My opinion is the e-shaft is most
    important,
        because most of these guys have held both automobile and aviation
        crankshafts, and the e-shaft is incredible in comparison.

        Which brings me to the list; if anyone has discards of any of these
        items that they'd be willing to donate, I'm willing to pay the
    postage.
        I'd prefer discards so I don't have to mail them back ;/). I'd also
        prefer they ship from somewhere in CONUS, as the postage from
    Australia
        / Europe / wherever might be more than my wife would tolerate.

        I will include pictures of a rotaries innards anyway, so it's not
        essential I get these. I just thought if someone's got scrap
    parts on a
        shelf somewhere I can use them.

        Thanks!

        --Kenny A.
        http://websites.expercraft.com/kennya/


        I have added your web site to the list of rotary builders
        web sites on the ACRE web site. http://www.rotaryeng.net

        Paul Lamar


        Kenny

        Are you in Kansas City/Overland Park area? If so maybe I can lend a
    hand


        Rick Pickett- lurker

    Thanks for the feedback everyone, I'll definitely contact Mark.
    Re-inventing the wheel is not my thing. I've only got 30minutes though,
    so I'll have to do some serious paring-down of his slides.

    Rick, Yes, I live in the KC area (Shawnee) and am a member of the Olathe
    / Overland Park EAA club (868). Do you have an e-shaft or rotor I can
    use? If not, I'll have them mailed from Houston.

    Paul- What's your opinion of posting the presentation on the ACRE site?
    We'll need Mark's permission, of course.

    --Kenny A.
    http://websites.expercraft.com/kennya/

    That is fine with me. I frequently give talks but much to Robin's
    chagrin
    I wing it :) My thing is I throw up a picture or graph and talk
    about it :)
    I don't use ppt.

    Check out my web site again. I just added a lot of pictures of other
    peoples
    completed installations that I think are well done.
    http://www.rotaryeng.net/
    Scroll down to the middle of the page. You can capture (right click
    save as)
    any of these you wish and use in ppt or anyway you wish.


    Paul Lamar

    -
    Kenny
    e-shaft is assembled in the engine, I can show up at your meeting
    with the
    whole assembly if need be. What is the date and time??
    PS-- Paul thanks for hosting this forum you are doing a wonderful job of
    expanding the rotary engine experience!

    Rick Pickett

Rick,
That sounds great! Ideally, you can bring in your block, and I'll have
an  e-shaft and rotor sent in.  Depends on how bad you want to haul the
block around ;/). Either way, please attend as my guest, I could use the
backup on the technical side. The meeting is Monday 2 February at 7 pm,
please contact me off-list for location / directions, etc. kenny dot
aron at gmail dot com.

Also, someone from Houston replied with an offer to mail up an e-shaft
and rotor. Please reply to me off-list & we can arrange the postage.
Thanks again!

--Kenny A.
http://websites.expercraft.com/kennya/


Kenny,

I am the guy in Houston.  Couldn't readily locate your direct email address
on your site and I am running late for work.

Feel free to give my cell a call.  I am a cop and can usually take a call
while on patrol. Also, if you want to send me your address privately, you
can send it to my work email at CBarber@BellairePolice.com or my office
email at CBarber@TexasAttorney.net.  I will likely take them to my local UPS
store to send them.

I will have to go by the hangar after work at 11:00 pm to pick up an
e-shaft and rotor.  I will try to find some that are not filthy

Good luck with the presentation/sermon.

All the best,

Chris Barber
Houston, GSOT
www.LoneStarVelocity.com

832-818-CELL (2355)


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.