Paul, here are photos of the RV-4 engine mount which I finally got
welded up after some delay. I will post about 25 photos on my web site
later this week. If you would like to have them I will send to you as
well. The main difference is the improvement in weld appearance which I
am extremely pleased with. Total weight with the Barry bushings, oil
pan and pick up tube is 26 lbs. This mount does gain some weight
because of the landing gear sockets and associated structure. I like
the first photo which shows how the rear beam is used to tie everything
together while at the same time keeping the tubing well clear of the
engine. Jerry
That is a beauty Jerry. Yes send them to me.
Paul Lamar
--
Jerry-
For this RV-4 mount, are the leg socket angles set for the later style long legs or the earlier short legs?
Thanks,
Mike
Mike & Diana
..at large somewhere on the planet..
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.