Subject: Electronic ignition
From: Rotary Engine
Date: 1/21/2009, 9:04 PM
To: AAA Put this in the To box


 Paul,

 For rotary, any opinion on which is better capacitive ignition or
 inductive ignition electronics?

 John Fair

 The consensus in the rotary racing industry is MSD.
 Capacitor discharge Multi Spark, One of my next projects
 is to design and build a simple system to trigger off the shelf
 dual or quad MSD ignition units. My hangar neighbor has done tons of
 R&D on lean burn engines and he claims the more powerful
 the ignition the leaner you can run the engine and the lower the fuel
burn
 up to a point.

 http://www.rotaryeng.net/Spark-plugs/Spark-plugs.html


 Paul Lamar

Paul- Evaluation of capacitive discharge will be interesting. When we built
our early electronic ignition system we looked at both inductive and
capacitive discharge advantages/disadvantages. Everett had almost 40 years
experience testing all the different ignition systems for race cars and
aircraft so we put that to use. The conventional inductive had much longer
burn time but did bleed off, whereas the CD had the fast rise time and no
bleed off (benefits) but a short burn time (disadvantage). We evaluated
a CD
system on only the trailing plugs because velocity by those is much lower
(leading plugs 90 meters p/second approx, and trailing 25 mps) and thought
maybe the CD on trailing plugs would help to prevent fowling. We didn't
find a significant advantage or need and opted for the longer burn and
simplicity of all inductive system and switching done back then with the
Mallory infrared triggers to eliminate the need for an amplifier box. The
inductive ignition seemed to be key on the key leading plugs because of
high
velocity by plugs benefitted from longer burn time.

Steve Beckham

The new CD ignitions fires over and over again
so the longer burn time is less of an issue.

If you use one MSD per rotor it has more time to fire more than once
at high RPM's.

Paul Lamar


Paul:

Dynatek makes a 2-ch restriking CDI (for motorcycles) that might work
well for the rotary? See
http://www.dynaonline.com/skins/products/sportbikes/arc_2/. Sorry, I
haven't learned the tiny url trick yet. Your comments?

cozyflyr


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.