Hi Paul,
For your information
http://www1.eere.energy.gov/vehiclesandfuels/pdfs/deer_2008/session5/deer08_vandyne.pdf
Woodward could be a company to contact for a turbocompounding solution
Enjoy yourself in Australia.
Best Regards to Robin and you
Randolph
Randolph Toom
Managing Director
heat2power
7 Rue Adolphe Focillon
75014 Paris
Thanks Randolph.
We knew they were working on it but it now appears turbo charger based turbo
compound is closer to off-the-shelf. Woodward is an old and very credible company.
I have a Woodward governor controlling the prop pitch in my Cessna 182.
Thanks to Ed Vandyne and Woodard for doing it.
Ed, Please try this on a Mazda RX8 rotary engine. You will be amazed.
http://www.rotaryeng.net/turbo-compound.html
Paul Lamar in Melbourne
Paul,
Looks like the push for fuel economy is bringing us "back to the
future" with turbocompounding.
Note that the lower exhaust enthapy of the diesel [compr ignition] makes
the gasoline engine a better candidate for effective turbocompounding.
The extreme expansion available to a diesel [CI] (due to extremely high
compression ratio = expansion ratio) in the piston leaves less energy
for the turbine. Since gasoline octane rating limits the SI compression
ratio, it also limits the expansion ratio, so more energy is available
in the exhaust to be recovered in spark ignition engines.
That DOE is funding Woodward on this development is encouraging.
When fuel is cheap, it is difficult to justify the expense and complexity
(parts not installed weigh nothing, cost nothing, never wear out and
never fail in service !) of these more advanced systems. With more expensive
fuel, they become economically more viable. It has never been about
technology, it has been ALL about economics.
I have to laugh every time some politician says "we need to develop
new technology" for fuel efficiency, solar, etc. I think "BS - all the technology
has been sitting on the shelf for many decades, waiting for the economic
need to make them viable in the marketplace". I simulated, designed
and tested a hybrid car and bus as part of a Univ of Fla team doing hybrid
vehicle design and testing in the early to mid 1970s - more than 35 years
ago!
Check it out:
http://de.scientificcommons.org/2476617
Been there, done that. It sat on the shelf for 30 years before being dusted
off and recycled as "newest developments in technology" - give me a break.
Bill
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.