Subject: Don Dunbars RX8 rotary powered Berkut
From: Rotary Engine
Date: 2/19/2009, 3:41 PM
To: AAA Put this in the To box

Don here in Perth found a cheap source for Mikuni carbs in
the U.S..

Eastern Performance Cycles
1318 Defence Highway
Gambrills MD 21054

42 mm $249 Each. Last time I priced these at a Harley
dealer they were about $1000 each.

A couple of these on your RX8 P-port
engine and you have a super cheap system that has no
high pressure fuel anywhere. Very important to Don
as he has experienced an in flight fire on a Jabriu
powered Pulsar.

Paul Lamar In Perth Aus

That Berkut looks GREAT Don !!

DB

A few carbs Don is considering for the RX8 P-port engine.
Yes Bill we talked about the carb heat required.
That is Don's pristine 1998 RX7 in the back ground.

Paul Lamar

Paul,
That array of carbs sends me back a few years. I had a block of 4 like the ones in
the next-to-last image on my last racebike.Four 43mm Kehin's on a Yamaha FZR 1000.
I'm sure Don will get good performance. Were the carbs in the last picture modified,
or did they come designed for a remote float bowl Don's Berkut does look great BTW.
I was considering it prior to getting my RV-10. Does Don have all the parts or
is someone doing Berkut stuff again
Bill Jepson

Don bought it from somebody else.

Paul Lamar

-- The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.