Don Dunbar, Dave Mccandless and I took a close look at this Revmaster carb
for
use with rotary, One would need two to get over 200 HP.
This looks like a good low cost and simple solution for the fuel system.
It appears to be a Mikuni flat slide carb of some kind with the float
bowl removed. However I cannot find the exact Mikuni model or on what
vehicle
it was used. I suspect the float bowl is removed to allow the mixture
to be adjusted using a low pressure gravity fuel feed. Rather brilliant
idea on Joe Horvath's parts. Joe is charging $330 each so I'll bet the
original version with float bowl is a lot cheaper.

Any body recognize this carb body?


Paul Lamar


Try this Edelbrock motorcycle carburetors web page.
http://www.edelbrock.com/motorcycle/carbs/intro.shtml

Clive Clapham

Thanks
That Looks like it.

Paul Lamar

Looks like Mikuni's HSR series. There're great. We put two of them on our twin rotor in a snowmobile. Then turbo charged them. We blew thru them and that worked great as well.
Skip Gorman

It is different than the HSR series. Don has one of those too. This carb
is from Edlebrock and modified by Revmaster for the VW. IMHO It is probably a Mikuni
principle copy more or less. It could be OEM Mikuni. The Edleborck version
has the float bowl which should work too.

http://www.edelbrock.com/new_products/power.shtml


2002-08 Yamaha Grizzly 660 The 3205 is a complete carb kit being offered
for the 2002-07 Yamaha Grizzly. This has been our most requested carb
kit for over five years. The Yamaha Grizzly has and still is... Click
here for more info!


2004-2007 RHINO 660 Designed to work on a stock or slightly modified
Yamaha Rhino 600, this Edelbrock Performer Series carburetor increases
horsepower and torque without sacrificing ride-ability... Click here for more info!



Paul Lamar



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.