Don is also building a Mustang II as well as a Berkut.
He has designed and a friend machines his own PSRU's.
I don't know where he gets all the time.
Paul Lamar
Paul,
Tried to read the figure provided. It does not take magnification
well. Any chance you might have a more detailed schematic, or even
better, a set of plans? Do you have more information on the rubber
flex connector?
Thanks,
Gordon
--
Try these three DWGs. Let me know if you need them in some other CAD format.
The coupling is a Lord. Here is a pdf of their catalog. The one Don has is
a bit stiff so you probably need a softer one to get the idle RPM
below 2500 engine RPM.
Paul Lamar
Thanks Paul!
I am in your debt.
Gordon
Thanks to Don.
BTW can you send me a larger screen capture jpg of the DWG? Rhino won't import
those DWGs
I think he is doing another design with a hollow
shaft for a constant speed prop. There is real need for that.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.