I was trying to find on their website something about composite
construction methods. I thought I
had read about carbon-fiber sandwich core. I finally found a brief
mention on their old website
(still active for the tail-dragger division) about the jet they built. It
was the first of their
pressurized models.
"The CA-J is a jet-powered kit-built airplane that closely resembles a
modern corporate jet.
Some have compared the profile of the CA-J to a scaled-down Citation in
appearance.
With seating for 8 and a projected cruise speed of 400 mph TAS @22,000,
this sleek new
low wing airplane will radically change most peoples idea of a kit-built
airplane. Utilizing
a proprietary carbon-fiber hybrid sandwich, Aerocomps extensive experience
with molded
composite airplanes shines through in the revolutionary CA-J."
Greg Fleming
Reminds me of the "carbon fiber" IVO prop.
One narrow strip of carbon fiber in each blade :)
In the case of the Compair that could be anything.
Now if they said carbon fiber skins with a Nomex honeycomb core I would be
more impressed.
When they are not specific thay are usually hiding something.
Paul Lamar
Paul
Is anyone flying a carbon airframe perhaps we can get some feedback on
lay-ups etc. Carbon by it's nature is very stiff and strong, yet some
suggest brittle. It would seem to be a lighter airframe it would be a single
carbon lay-up, to keep the resin weight down.
I know the Vision only uses a single layer of carbon ( with other glass
lay-ups) for tail feather stiffness.
Perhaps to keep weight down and provide the necessary stiffness in the prop,
only one layer of carbon is necessary.
George (down under)
-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.