Subject: Don Dunbar Harley alternator
From: Rotary Engine
Date: 2/24/2009, 8:20 AM
To: AAA Put this in the To box


These permanent magnet alternators make a lot of
sense. Super simple so they are intrinsically more reliable.
No field windings to deal with. No belt drives.
As I recall this one is about 40 amps.
Don intends to mount it on the nose of the
e-shaft. Should be interesting due to the higher
RPM of the rotary compared to the Harley engine.
If it lives it may put out a bit more current.
This is very similar to the Revmaster alternator.

One of the unique features of the Revmaster
alternator is it has two higher voltage coils built in
that apparently generate 300 or 400 volts for an ignition
system. Super simple for a two rotor as the coils
can do the timing automatically. Thus the coils directly excite
the primary of the stock Mazda coils raising the secondary
voltage to 20,000 volts or so to fire the plugs.
Extremely simple and should be absolutely reliably.
No battery voltage required. Better than a mag or anything
else for that matter.

I think this is well worth experimenting with.
The ultimate aircraft rotary ignition system.

Paul Lamar


Oh they work great. That's all we (Rotamax?)used as you know. Just
have to be
careful which one you use. A lot of copies that are not reliable. You get
it fitted up and I'll take one.

Skip Gorman


Yeah there you go. That was the cheap one. We had limited budget to work
with. The better ones look the same. We used a trigger off that to input
the CDI ignition. Simple.

Skip Gorman
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.