Paul, This is the drawing I was referring to, Sorry.


 Rick

 No problem.

 If you are going to all that trouble you might as well
 use the new design with the built in bell mouth.

 I can send you this one as well if you don't want to do the bell mouth
 trick. Are you making them with a manual mill or NC mill?

 I have a whole box of stand alone bell mouths for 2 inch .065 wall tubing
 as well If you want some. Send a stamped padded envelop with your address
 on
 it and twenty dollars cash inside and I will mail a couple to you.

 Paul Lamar

 Rick Pitts wrote:
 Paul, I would gladly take you up on the offer on the Bell mouths, but I have
 mine already. I was going to build and mount the "Old Style" a little closer
 to the bend in the 2" tube. I have my air box made (with the bell mouths
 welded in).

 Thanks
 Rick

OK fortunately I still have the original dwgs so give me a couple
of hours and I will export the dxf and stp.

Paul Lamar

OK check the dims on your injectors to make sure the pocket is right.

Here it is.

Paul Lamar