Good hearing from you Steve. I hope you have recovered
from your crash. Is the US facility officially closed?
Things have become somewhat incommunicado since Francois
left. We are all rooting for their success up to the
point of paying full pop :)
Thanks for the tip.
Paul Lamar
Hi Paul,
Where did you get the news that Mistral's US operations have closed? We
are up and running - Mistral Engines USA, Inc - in DeLand, Florida and
are well into the conformity inspections. One G300 is in a US test cell
for calibration and we expect to build the first article engine in
DeLand within a couple of months.
I just flew our Maule MX-7 in yesterday. We will put a few hours on it
and then re-engine it with the G300. Not only is the airframe very
rugged and the Vso low, but it has supported 160hp up to 420hp, so will
be a great test bed for our current 4 models.
As you know, Philippe Durr has been Mistral's CEO for several months.
He joins Mistral with exceptional organizational, production and
marketing expertise which he has put to use developing business
strategies for this ever changing climate. We are all heavily involved
with the certification effort. Once that has relaxed a bit, Mistral
will dedicate more time to staying in closer contact with our friends.
Please give a call if you are in the area. Thanks again for the good
wishes.
Stephen
Stephen Roth
Operations Manager
Mistral Engines USA, Inc
1624 Old Daytona ST
DeLand, FL 32724
386 624 6904 land
386 624 6906 fax
386 405 6200 cell
we have not been getting any news since Ms Perrine opted off the
list about six or 8 months ago.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.