Subject: Revmaster alternator and ignition for Mazda rotary
From: Rotary Engine
Date: 2/27/2009, 7:34 AM
To: AAA Put this in the To box


Dang! How did I miss that? Your absolutely right. Thanks for reading
my message
and catching that. I saw what I wanted to see.  That is why RevMaster
have a capacitor
discharge circuit in there. The 300 volts is rectified and charges the
capacitor.
The capacitor is then discharged through the primary of the coil by a mag
pickup and transistor.  No DC to DC converter necessary. Still works
with out a battery.

If we take all but two magnets out it might work but then
the alternator current capacity would be much reduced. Perhaps we can
displace
the ignition coils axial by a few inches and use another two rotating
magnets also
displaced axial for just the ignition part.  Pretty easy to build a
stand alone
system along those lines. The 300 volt coils then become the ignition
trigger devices.
Worth a try I think. I know where to buy magnets.

True on the inductive ignition coils but they will work as CD pulse
transformers
as I have done it several times starting about 40 years ago back in
the days
of thyratron and mechanical vibrator based DC to DC converters :) That
is about
how old CD ignition systems are :) I think Heathkit had a CD kit I built
and it worked. The mechanical vibrator had a limited life.

Thanks again for reading the message and thinking about it.

Paul Lamar

  Paul, The Honda Silver Wing, a V Twin used the same set up for
  the alternator and spark. Including spark advance, Virg



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.