Subject: EFI Pump Alternatives -- WAS: Re: Aeromotive pressure regulator
From: Rotary Engine
Date: 3/3/2009, 10:22 AM
To: AAA Put this in the To box



It is sometimes difficult to mount fuel pumps in AC wings.
Most people don't do it. They mount the pumps on the firewall.

Paul Lamar

Paul,

I'm just starting construction of my fuel tanks for a Zenith CH-640.
I'm opting for a four wing tank system. I'll likely be using a 16b conversion,
fuel injection based on your designs. With the discussion on-going about
in tank fuel pumps and fuel return lines, I am asking if I need to make
accomodation for anything special. Presently, my tanks have no provision for
a fuel return or in tank pump. Would it be necessary to design in any of this stuff?

Thanks, C. Smith

Yes you might think of adding a large removable panel in the root
ribs for internal pumps. The 640 has a nice thick wing for internal
pumps. Looks like the tanks are in the leading edge. If not
practical use two lines from each tank. One for feed according
to the plans and one for return fuel.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.