Hi Paul-
Just wanted to share a very earnest conversation I had today.
One of the visitors we got while running the engine was an alleged
former rotary-powered airplane owner. He was terribly interested in
telling us that "Apex seals are completely optional for aviation use.
They're only needed by cars so they can idle; for aviation use they are
not needed."
Wow...
Mark (Rocky Mtn High)
Yes I have heard rumors to that affect. If you can spin it fast
enough to start it will run at high RPM with no apex
seals. The question is: Is that practical? :)
Paul Lamar
I heard that a group that was developing the rotary engine for the
aviation market was trying to develop retractable apex seals I, think
that went out of business thought.
Clifton
I would have to agree with Paul that this one is a myth. Without apex
seals the efficiency would go right out the window. Possible blow/burn
through to the trailing chamber seems a real possibility. The resulting
pre-ignition could be VERY ugly. The Rotary also needs all of its seals
to be working to maintain decent compression. Theroetically it might be
possible to run if the clearances were tight enough. When you consider
that the racing world is cutting back the rotor sides to allow a
little MORE clearance to allow for rotor rock at high speed it would
seem unlikely that you could get the engine to run without seals.
Bill Jepson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.