I have decided to offer S-BEAM ENGINE MOUNT KITS.  The kit will
 contain the S-beam built to Paul Lamar's drawings so that each kit is
 still tailored to the individual project. It will also include the
 high capacity aluminum oil pan and a pick-up so there will be no
 aluminum fab required.

 The builder (1) bolts  the S-beam and oil pan to the engine. (2)
 Blocks up the engine in front of the firewall  exactly as he wants it
 to be, and then (3) fits the engine mount tubing.  No fixture required
 and a perfect fit guaranteed every time.


 Kit price is $900.00.

 e-mail:  jerry@jerryhey.com <mailto:jerry@jerryhey.com


 Sounds good Jerry,

 For a Long-ez, have you been able to get the overall
 length of the S-beam to less than 18 inches?

 Is the position of the bung-hole on the oil pan selectable?

 Joe Graham

 Joe,  glad to hear from  you.  I thought  you and Paul were working
 on the final design.  As far as I know the overall length of the S-
 beam is proposed to be  18.31 inches with a distance between Barry
 centers of 16.31 inches. Paul, can  you take another look at this.
 If  you see no problems,  I am ready to go ahead.

  Joe, the drain has to be in the deepest part of the pan but it can
 be located anywhere side to side.    Jerry

That is fine.

Paul Lamar