I have decided to offer S-BEAM ENGINE MOUNT KITS. The kit will contain the S-beam built to Paul Lamar's drawings so that each kit is still tailored to the individual project. It will also include the high capacity aluminum oil pan and a pick-up so there will be no aluminum fab required.
The builder (1) bolts the S-beam and oil pan to the engine. (2) Blocks up the engine in front of the firewall exactly as he wants it to be, and then (3) fits the engine mount tubing. No fixture required and a perfect fit guaranteed every time.
Kit price is $900.00.
e-mail: jerry@jerryhey.com <mailto:jerry@jerryhey.com
Sounds good Jerry,
For a Long-ez, have you been able to get the overall length of the S-beam to less than 18 inches?
Is the position of the bung-hole on the oil pan selectable?
Joe Graham
Joe, glad to hear from you. I thought you and Paul were working

on the final design. As far as I know the overall length of the S- beam is proposed to be 18.31 inches with a distance between Barry centers of 16.31 inches. Paul, can you take another look at this. If you see no problems, I am ready to go ahead.
Joe, the drain has to be in the deepest part of the pan but it can be located anywhere side to side. Jerry
That is fine.
Paul Lamar
Hi Jerry,
Is that price good for the 20B also? If not, how much is it going for?
Mine will be going into a Velocity SE-RG.
Thanks much and best regards!
John Bell