I have decided to offer S-BEAM ENGINE MOUNT KITS. The kit will
contain the S-beam built to Paul Lamar's drawings so that each kit
is still tailored to the individual project. It will also include
the high capacity aluminum oil pan and a pick-up so there will be no
aluminum fab required. The builder (1) bolts the S-beam and oil pan
to the engine. (2) Blocks up the engine in front of the firewall
exactly as he wants it to be, and then (3) fits the engine mount
tubing. No fixture required and a perfect fit guaranteed every time.
Kit price is $900.00. e-mail: jerry@jerryhey.com <mailto:jerry@jerryhey.com
 Sounds good Jerry, For a Long-ez, have you been able to get the
overall length of the S-beam to less than 18 inches? Is the position
of the bung-hole on the oil pan selectable? Joe Graham Joe, glad to
hear from you. I thought you and Paul were working
on the final design. As far as I know the overall length of the S-
beam is proposed to be 18.31 inches with a distance between Barry
centers of 16.31 inches. Paul, can you take another look at this. If
you see no problems, I am ready to go ahead.  Joe, the drain has to
be in the deepest part of the pan but it can be located anywhere
side to side. Jerry That is fine. Paul Lamar
Hi Jerry,
Is that price good for the 20B also? If not, how much is it going for?
Mine will be going into a Velocity SE-RG.
Thanks much and best regards!
John Bell

Hi John,  yes the price is for most engine mounts.  You should contact
Paul to get the engine mount properly designed so that we know the
exact length of the S-beam (and whether it is symmetrical or
asymmetrical  and  also pan details.  Assuming there are no  unusual
features the price is good.    Jerry

Please e-mail me directly:  jerry@jerryhey.com