I suspect if you took two of these old
coils, mounted back to back, 180 degrees out about six inches apart, you
would need nothing else except a powerful rotating permanent magnet. The
primary winding would act as a alternator to generate the ignition power. I
also suspect If the laminated iron core was replaced with a long cylindrical
permanent magnet the system would work even better. The magnetic field would
be twice as strong.
------------------------------------------------------------------------
These coils normally work by the magnetic field created by the primary coil
collapsing into the iron core passing through the seconday coil creating the
spike of current in the secondary windings when the current is removed from
the primay coil. (Larry :)
I am going to try to trick them into thinking the internal magnetic field has
collapsed by using a rapidly changing external magnetic field. Namely a rotating
very strong magnet.
Fundamentally this is no different than the permanent magnet sensors except the magnet
is much much more powerful and a lot more primary current is required to fire
the plugs so larger wire must be used. Formally magnetic sensors were made like
this coil and a current had to be generated in the coil by applying an
external voltage which generated the magnetic field. Another analogy is a permanent
magnet alternator compared to the traditional field winding alternator.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.