Subject: REAL cheap and REAL simple ignition system.]
From: Rotary Engine
Date: 3/9/2009, 4:37 PM
To: AAA Put this in the To box

I suspect if you took two of these old
coils, mounted back to back, 180 degrees out about six
inches apart, you would need nothing else except a
powerful rotating permanent magnet. The primary
winding would act as a alternator to generate the ignition
power. I also suspect If the laminated iron core was replaced
with a long cylindrical permanent magnet the system
would work even better. The magnetic field would be twice
as strong.

Paul Lamar


It's been a while since I took these EE classes..  I don't think using
a magnetized core would make any difference.  The metal core is
designed to efficiently connect the lines of magnetic potential
(flux), increasing the linkage between the primary and secondary
windings.  The core loses are a function of volume (eddy current), so
making the core from insulated thin stacked plates makes it more
efficient

http://en.wikipedia.org/wiki/Transformer.


Regards,

Matt-


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.