I suspect if you took two of these old
coils, mounted back to back, 180 degrees out about six inches apart, you
would need nothing else except a powerful rotating permanent magnet. The
primary winding would act as a alternator to generate the ignition power. I
also suspect If the laminated iron core was replaced with a long cylindrical
permanent magnet the system would work even better. The magnetic field would
be twice as strong.
Paul Lamar
So before I spend any more money, the make yer own pick-up idea is dead?
C. Smith
Looks like it for the 555 EFI trigger. The off the shelf
trigger price is down to $17.
I could still use some help on the super simple ignition system.
First thing to try is a large rotating magnet and a couple of old
style coils. If that does not work one could go to a couple
of coils of 22 gage wire. The primary coil length is 40 mm
OD is is also 40 mm. My guess on the number of turns
is 40mm/.66 mm inches or 60 turns per layer or about 250 turns.
Resistance is about .6 ohms so looking in the chart that would
be about 98 feet which cross checks with the dimensions of the coil.
I still don't know what the induced voltage would be
but Joe's guys suggest 1500 turns of smaller wire.
Still a lot of unknowns.
How much have you spent so far?
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.