Subject: Engine sale
From: Rotary Engine
Date: 3/11/2009, 6:55 PM
To: AAA Put this in the To box


Gentlemen,
 At the request of my FAA medical examiner I am leaving aviation.
I have the following engines for sale. Next week they will be on
Barnstormers.com and eBay.
If you have any interest please email me at  rjechtinaw@toast.net
Photo's available
Thank you,
Randy

ENGINES
New Mazda 13B (RX8?)-  -  - $6000

Factory new 2004 Mazda 13B (RX8?) forth generation Renesis crate engine
completely modified for aviation by Bruce Turrentine.
4-port intake, 3-port exhaust.
10:1 new, ceramic coated, eye brow ported, high compression rotors
Has the required RWS PSRU flexplate
New Vicon seals
Blocked oil ports
Black and yellow powder coated
Wt. as shown 176 lbs.
225 hp @ 7500 rpm (+/- depending on intake, exhaust design)
-----------------------------------------------

Slightly used Mazda 13B -  -  - $2500

2005 Mazda RX-8 4-port Renesis engine used for emissions testing only,
never installed in a car. Does not have an exhaust
manifold otherwise it is a complete engine. Both of these engines
are in excellent shape. Roll over nicely and with very good compression.

Randy

You know how I feel about ceramic coated rotors :(

Paul Lamar

Paul:

Can you tell me about your experiences with ceramic coated
rotors?  Is it because some have debonded in the past?

Greg Fleming
London, Ontario, Canada

Yes and when it comes off your expensive  rotor housings are history.
Also there are no measurable benefits. Its all hype IMHO.
There is no effective method of quality control.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.