Subject: Power sport gear box failures
From: Rotary Engine
Date: 3/15/2009, 9:19 AM
To: AAA Put this in the To box


Paul,
IMHO a mistake of any gear box design is the omission of  a
damper. If you don't run one between the shaft and the gear box, you  at
least need a harmonic balancer style one to help kill the  resonance.

Everyone also has the wrong idea on lubrication. All gear  boxes should
have
their own lube system and use a synthetic gear  lube.... like the shell
aircraft turbine gear box lube. Turbo prop engine  gear boxes have used
it
for many years.... using engine oil in  the gear box is a mistake IMHO.

Larry

Larry,
I have the same thoughts and am pleased someone with  the experience
confirms
it.
George (down under)


George,
couple of reasons for  the way I think.....
1. I don't want cross contamination from engine  to gear box or gear box to
engine
2. The gear box  lubricants are designed as such and do a far better job on
gears and  roller bearings.
3. Current gear rotor oil pumps are easy to build  into the gear box as
they
are direct drive on the shaft.  millions of them in use.
Larry

Larry,
I'm with you on one  an two - but hadn't worked out how to do the pump - are
they cam on the  shaft driven?
George ( down under)


What about cooling the lubricant?

Rich


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.