Paul,
IMHO a mistake of any gear box design is the omission of a
damper. If you don't run one between the shaft and the gear box, you at
least need a harmonic balancer style one to help kill the resonance.
Everyone also has the wrong idea on lubrication. All gear boxes should
have
their own lube system and use a synthetic gear lube.... like the shell
aircraft turbine gear box lube. Turbo prop engine gear boxes have used
it
for many years.... using engine oil in the gear box is a mistake IMHO.
Larry
Larry,
I have the same thoughts and am pleased someone with the experience
confirms
it.
George (down under)
George,
couple of reasons for the way I think.....
1. I don't want cross contamination from engine to gear box or gear box to
engine
2. The gear box lubricants are designed as such and do a far better job on
gears and roller bearings.
3. Current gear rotor oil pumps are easy to build into the gear box as
they
are direct drive on the shaft. millions of them in use.
Larry
Larry,
I'm with you on one an two - but hadn't worked out how to do the pump - are
they cam on the shaft driven?
George ( down under)
--
Larry,
I've have been waiting years for someone to bring this point up.I
agree that eliminating the metal shaver gear box from taking out the
engine would be a wise move.This would entail making a sump and small
oil cooler as well though. I am not so sure on the second point.Isn't
the rotary engine basically a gear to gear set-up with the rotors riding
on ball bearing?
Of course temperature difference is a big factor.Oil engineered to
lubricated the rotary gears would have to withstand a higher temperature.
Do you know how helicopters lubricate and cool their planetary boxes?
Doug in Japan
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.